NSN 5990-00-753-8870 · NIIN 007538870 · FSC 5990
NO DASHES 5990007538870
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 18.0 |
| AAQL | BODY STYLE | |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -4.0 TO 4.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 70.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.000 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.000 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 560.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 350.00 |
| CQTM | TERMINAL LOCATION | REAR |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 550.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 467.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 795.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 310.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2000.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0310 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 600.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| AJSL | BODY SIZE | 8 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0400 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.5990 AND INCHES MAXIMUM 1.6150 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7445 AND INCHES MAXIMUM 0.7450 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3590 AND INCHES MAXIMUM 0.3750 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.6910 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| U209264 | 82686 |