NSN 5990-00-754-8068 · NIIN 007548068 · FSC 5990
NO DASHES 5990007548068
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 209.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3820 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1830 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 78.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 16.00 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS MINIMUM 2000.0 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0620 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 5.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 35.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.8010 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 150.00 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9620 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 960.0 |
Cross-references
18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 191109 | 37695 |
| GA10025L1 | 64959 |
| GA10025L1 | 70408 |
| 1JC1754-1 | 79500 |
| 10351578 | 79500 |
| 1JC7894-6 | 79500 |
| 10351578 | 82577 |
| 990450-1 | 82577 |
| 6010323 | 81891 |
| R210-1 | 88818 |
| 307571-3 | 88818 |
| R210-1AA | 88818 |
| R210-1A | 88818 |
| 10351578 | 88818 |
| 1JC1754-1 | 97942 |
| 10351578 | 97942 |
| 1JC7894-6 | 97942 |
| 10351578 | 18876 |
Supersedes
This item replaces cancelled NIIN 005030020. An older drawing citing one of those numbers resolves here.