NSN 5990-00-756-2555 · NIIN 007562555 · FSC 5990
NO DASHES 5990007562555
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
51 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 75.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| AJTE | ZSO-90 RESISTANCE IN OHMS | NOMINAL 17.90 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 38.50 |
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 19.30 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 2.5 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 50.10 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2660 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 544.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 246.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 35.50 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 16.40 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CTDW | PLUS J ZSO-90 REACTANCE IN OHMS | NOMINAL 86.90 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2405 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 45.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 94 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 33.80 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.9900 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 1.9995 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.50 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0460 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES NOMINAL 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.4450 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.9900 |
| AJSL | BODY SIZE | 23 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 264.0 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 2.2500 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MAXIMUM 0.6730 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1720 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.2940 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AY240BA 1 A1 | 55972 |
| 8212801 | 81349 |
| MIL-S-20708/94 | 81349 |
| 23CX4A | 81349 |
| MS51082-2 | 96906 |
| VCX23/36-4B | 10112 |
| CX23-4X3 | 10112 |
| 8212801 | 19200 |
Supersedes
This item replaces cancelled NIINs 006735448 · 007703504. An older drawing citing one of those numbers resolves here.