NSN 5990-00-767-0893 · NIIN 007670893 · FSC 5990
NO DASHES 5990007670893
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
46 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0260 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.6080 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 2726.00 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 2.2500 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.9500 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 700.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AKAN | SHAFT THREAD CLASS | 3A |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, STEPPED, THREADED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1560 |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 35.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 833.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 25.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES MAXIMUM 0.380 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 16.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.2500 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.0625 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 1.8870 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.0550 |
| AJWY | SECOND SHOULDER FACE TO REAR FLANGE DISTANCE | INCHES NOMINAL 1.7300 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| CSSD | SHAFT STEP DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1900 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8440 |
| CTJB | SHAFT STEP LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3400 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0010 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0050 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.1250 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MAXIMUM 0.2035 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1SHCT2515T38 | 73693 |
| 44867 | 82340 |
| 62857-1 | 82340 |