NSN 5990-00-772-9277 · NIIN 007729277 · FSC 5990
NO DASHES 5990007729277
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4190 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 179.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 78.40 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| AAQL | BODY STYLE | |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2000 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 9.454 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.8570 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 42.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 80.50 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 10.40 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | NOMINAL 26.80 |
| CQTM | TERMINAL LOCATION | REAR |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 25.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 15.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJSL | BODY SIZE | 11 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5550 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 3A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 145.0 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1867 AND INCHES MAXIMUM 0.1872 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 760.0 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-R-21530/1 | 81349 |
| 11R2N4R100A | 81349 |
| 3R983-004D | 88818 |