NSN 5990-00-781-6760 · NIIN 007816760 · FSC 5990
NO DASHES 5990007816760
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 265.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSL | BODY SIZE | 11 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5620 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 102.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 18.70 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 11.20 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 1.2 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 19.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 4.50 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 21.70 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1870 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0620 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, HOLLOWED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0500 |
| ALNF | SHAFT HOLE DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0630 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6250 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CS1369 | 32988 |
| TRH-11-CBS-4/A933 | 4H618 |
| AY110DA49B1 | 55972 |
| 10709A001 | 83942 |
| AY110DA49B1 | 96774 |
| TRH-11-CBS-4/A933 | 99932 |
| 10218-001 | 10138 |
Supersedes
This item replaces cancelled NIINs 001371143 · 012302824. An older drawing citing one of those numbers resolves here.