NSN 5990-00-788-9021 · NIIN 007889021 · FSC 5990
NO DASHES 5990007889021
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 770.00 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.8123 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2230.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0350 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 170.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 14.000 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 178.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 1070.00 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 30.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 70.00 |
| AAQL | BODY STYLE | |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 6.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 560.00 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 19.5 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 68.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSL | BODY SIZE | 10 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 490.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 300.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.585 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.6310 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 4053-19 | 99932 |
| CTH-10-WS-0001/F076 | 99932 |