NSN 5990-00-795-3038 · NIIN 007953038 · FSC 5990
NO DASHES 5990007953038
In Stock
RESOLVER,ELECTRICAL,LINEAR
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.7350 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES MAXIMUM 0.125 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.5000 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MAXIMUM 0.0900 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0005 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 565.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, FLATTED |
| CTJK | SHAFT FLATTED PORTION THICKNESS | SINGLE SHAFT INCHES NOMINAL 0.0580 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.025 |
| AJVP | MAXIMUM LINEAR RANGE IN DEG | -50.0 TO 50.0 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0002 AND INCHES MAXIMUM 0.0007 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 72.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 75.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.500 |
| AJVR | OUTPUT VOLTAGE CHANGE PER DEG IN VOLTS | 0.26 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 1.00 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 45.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 320.0 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4370 |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CWFM | SHAFT FLATTED PORTION LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3370 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 127.00 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CQTM | TERMINAL LOCATION | REAR |
| MATT | MATERIAL | BODY ALUMINUM |
| AJVQ | LINEARITY IN PERCENT | 0.50 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| AAQL | BODY STYLE | |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 1.00 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CM41015005 | 88818 |
| 576R391H01 | 97942 |
| LTH-8-G-4/L847 | 99932 |
| LTC-8-G-4 | 99932 |
| 576R391H01 | 18323 |