NSN 5990-00-797-7649 · NIIN 007977649 · FSC 5990
NO DASHES 5990007977649
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0160 AND INCHES MAXIMUM 0.0310 |
| CQTM | TERMINAL LOCATION | REAR |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3700 AND INCHES MAXIMUM 0.3800 |
| AJSL | BODY SIZE | 10 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 56232-714056-2 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 55.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6690 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0003 AND INCHES MAXIMUM 0.0015 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0330 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.1110 AND INCHES MAXIMUM 1.1210 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 42.00 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0270 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 15.000 AND INPUT TO OUTPUT MAXIMUM 19.000 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR MINIMUM 0.440 AND STATOR TO ROTOR MAXIMUM 0.468 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 25.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 7.00 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 60.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 200.00 |
| AAQL | BODY STYLE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 714056-2 | 56232 |