NSN 5990-00-810-1518 · NIIN 008101518 · FSC 5990
NO DASHES 5990008101518
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
48 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABWV | SHAFT DIAMETER | REAR SHAFT INCHES MINIMUM 0.0775 AND INCHES MAXIMUM 0.7800 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES MAXIMUM 0.3950 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6250 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 53.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 120.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 30.0 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES MAXIMUM 0.125 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0050 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0003 AND INCHES MAXIMUM 0.0005 |
| ABXF | SHAFT LENGTH | REAR SHAFT INCHES MAXIMUM 0.2740 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 16.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.1050 AND INCHES MAXIMUM 1.1130 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AAQL | BODY STYLE | |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 2.203 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.3110 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 3280.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 570.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 330.00 |
| CRSJ | SHAFT TYPE | BOTH SHAFTS ROUND |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 21.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 50.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 625.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 93.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 570.00 |
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 106.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 385.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 60.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | OUTPUT TO INPUT NOMINAL 4.200 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 34.00 |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 68.00 |
| AJSL | BODY SIZE | 12 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.1850 AND INCHES MAXIMUM 1.1910 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.9630 AND INCHES MAXIMUM 3.0450 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 124851-02 | 35351 |
| U904-001 | 88818 |
| U904-001-D | 88818 |
| 464090-2 | 96214 |