NSN 5990-00-810-9557 · NIIN 008109557 · FSC 5990
NO DASHES 5990008109557
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
49 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 94.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 135.15 AND MAXIMUM 182.85 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 82.30 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.00 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7650 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2190.00 |
| CQZS | SHAFT SLOT DEPTH | FRONT SHAFT INCHES NOMINAL 0.0300 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 395.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 171.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 356.00 |
| AJTE | ZSO-90 RESISTANCE IN OHMS | NOMINAL 113.00 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 2210.00 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES MINIMUM 0.4600 AND INCHES MAXIMUM 0.5640 |
| AJTR | ZSO-90 IMPEDANCE ANGLE IN DEG | NOMINAL 71.30 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 116.45 AND MAXIMUM 157.55 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0450 AND INCHES MAXIMUM 0.0550 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.00 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 60.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 880.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 295.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 1120.00 |
| CRHN | SHAFT SLOT WIDTH | FRONT SHAFT INCHES NOMINAL 0.0250 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 172.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | NOMINAL 25.80 |
| AJTQ | ZSO-90 IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 354.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 59.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.2650 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 1130.00 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 15.0 |
| AJSL | BODY SIZE | 11 |
| CRSJ | SHAFT TYPE | FRONT SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.752 AND ROTOR TO STATOR MAXIMUM 0.814 |
| CTDW | PLUS J ZSO-90 REACTANCE IN OHMS | NOMINAL 335.00 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9700 AND INCHES MAXIMUM 0.9800 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 81.30 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RS911-2H | 88818 |
| 96C814-001 | 04660 |