NSN 5990-00-811-3275 · NIIN 008113275 · FSC 5990
NO DASHES 5990008113275
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 11.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.500 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 76.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 53.00 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 63.40 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 299.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 71.80 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 161.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 400.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9620 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.1195 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.8010 |
| CQTM | TERMINAL LOCATION | REAR |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 15.0 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3820 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 1.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1830 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0620 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 70.00 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AB973 | 61349 |
| 990000-1 | 82577 |
| CT-11-A-25 | 99932 |