NSN 5990-00-812-1439 · NIIN 008121439 · FSC 5990
NO DASHES 5990008121439
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 45.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 46.00 AND MAXIMUM 56.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 2.300 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 13400.00 AND MAXIMUM 16700.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 81.00 AND MAXIMUM 84.50 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 500.0 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1700 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.2990 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.9900 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| AJSL | BODY SIZE | 23 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1700 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2403 AND INCHES MAXIMUM 0.2405 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 1040.00 AND MAXIMUM 1260.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.9900 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 1.9995 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES NOMINAL 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 3.5800 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MAXIMUM 0.2900 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7190 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 50.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 5.7 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 9056158 | 10112 |
| 9056158 | 14404 |
| 23CT1227-1 | 14404 |
| 9056158 | 18876 |