NSN 5990-00-812-6491 · NIIN 008126491 · FSC 5990
NO DASHES 5990008126491
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 71.10 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.1600 AND INCHES MAXIMUM 2.1840 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7960 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 10.50 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.000 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 74.30 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 79.70 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 15.00 |
| AAQL | BODY STYLE | |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 17.00 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 250.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 86.00 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 165.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3640 AND INCHES MAXIMUM 0.3880 |
| AJSL | BODY SIZE | 11 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7RS941-1A | 88818 |
| 10RS941-1A | 88818 |
| 7RS9411A | 88818 |
| TDH11E4 | 99932 |
| TDH-11-E-4/B776 | 99932 |
Supersedes
This item replaces cancelled NIINs 001691970 · 005560747 · 005385956 · 005787430 · 006831015. An older drawing citing one of those numbers resolves here.