NSN 5990-00-812-7608 · NIIN 008127608 · FSC 5990
NO DASHES 5990008127608
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 78.50 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 1300.00 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5840 AND INCHES MAXIMUM 0.6080 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 1580.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.846 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 20.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 80.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 78.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 29.00 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7960 |
| CQTM | TERMINAL LOCATION | REAR |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 46.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.3800 AND INCHES MAXIMUM 2.4040 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 004860019. An older drawing citing one of those numbers resolves here.