NSN 5990-00-818-4535 · NIIN 008184535 · FSC 5990
NO DASHES 5990008184535
In Stock
SYNCHRO,DIFFERENTIAL RECEIVER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0500 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 15.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0810 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 67.00 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 138.0 |
| CQTM | TERMINAL LOCATION | REAR |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 72.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 290.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 14.00 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0610 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4370 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6400 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 10.80 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 8.50 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.0150 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 6.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 413130-1 | 96214 |
| CDH11B2A583 | 99932 |
Supersedes
This item replaces cancelled NIIN 006835979. An older drawing citing one of those numbers resolves here.