NSN 5990-00-819-2615 · NIIN 008192615 · FSC 5990
NO DASHES 5990008192615
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 275.0 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3570 AND INCHES MAXIMUM 0.3930 |
| AJSL | BODY SIZE | 8 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.6040 AND INCHES MAXIMUM 1.6340 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0150 AND INCHES MAXIMUM 0.0250 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 530.00 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 120.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 48.0 |
| AJTX | COMPENSATION METHOD | RESISTOR COMPENSATED |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0400 AND INCHES MAXIMUM 0.0460 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.2410 AND INCHES MAXIMUM 1.2470 |
| CQTM | TERMINAL LOCATION | REAR |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 75.00 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 72.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0300 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5480590P26 | 24446 |
| 5480590P26 | 97424 |
| LTH8A4 | 99932 |