NSN 5990-00-820-5738 · NIIN 008205738 · FSC 5990
NO DASHES 5990008205738
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.7100 |
| AAQL | BODY STYLE | |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 250.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 230.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 170.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 20.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4955 AND INCHES MAXIMUM 0.5000 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 830.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, FLATTED |
| CTJK | SHAFT FLATTED PORTION THICKNESS | SINGLE SHAFT INCHES NOMINAL 0.0070 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 6.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.2410 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 630.00 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.6920 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4690 |
| AJSL | BODY SIZE | 8 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 43.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 450.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 270.00 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7470 AND INCHES MAXIMUM 0.7500 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| CWFM | SHAFT FLATTED PORTION LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3060 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 576R392H01 | 79500 |
| 576R392H01 | 97942 |
| CSC8G4 | 99932 |