NSN 5990-00-822-8350 · NIIN 008228350 · FSC 5990
NO DASHES 5990008228350
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 10.800 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 152.00 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 44.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 115.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 31.70 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2460 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.7150 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8370 AND INCHES MAXIMUM 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 410.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 86.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 22.00 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 110.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0100 AND INCHES MAXIMUM 0.0150 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 67.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0620 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4690 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0630 |
| AJSL | BODY SIZE | 10 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0210 AND INCHES MAXIMUM 0.0310 |