NSN 5990-00-824-6046 · NIIN 008246046 · FSC 5990
NO DASHES 5990008246046
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
44 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.6940 AND INCHES MAXIMUM 2.7300 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.7120 AND INCHES MAXIMUM 0.7130 |
| CSPK | PLUS J ZCO REACTANCE IN OHMS | MINIMUM 1260.00 AND MAXIMUM 1540.00 |
| CTJK | SHAFT FLATTED PORTION THICKNESS | SINGLE SHAFT INCHES NOMINAL 0.1060 |
| CWFM | SHAFT FLATTED PORTION LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7060 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 493.00 AND MAXIMUM 667.00 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 314.50 AND MAXIMUM 425.50 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9800 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJTY | ZCO RESISTANCE IN OHMS | MINIMUM 314.50 AND MAXIMUM 425.50 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 8.000 AND INPUT TO OUTPUT MAXIMUM 10.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 15.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 7.0 |
| AJTA | ZRS RESISTANCE IN OHMS | MINIMUM 516.80 AND MAXIMUM 699.20 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 332.00 AND MAXIMUM 498.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 180.00 AND MAXIMUM 270.00 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 22.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 160.0 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | MINIMUM 1467.00 AND MAXIMUM 1793.00 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0450 |
| AJSL | BODY SIZE | 11 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0320 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | MINIMUM 1260.00 AND MAXIMUM 1540.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0320 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | MINIMUM 516.80 AND MAXIMUM 699.20 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.985 AND ROTOR TO STATOR MAXIMUM 1.015 |
| AAQL | BODY STYLE | |
| AJWQ | PILOT LENGTH | INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 2.0590 AND INCHES MAXIMUM 2.0650 |
| CQTM | TERMINAL LOCATION | REAR |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1247 AND INCHES MAXIMUM 0.1257 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 577R708H06 | 97942 |
| BQC11DF9A795 | 99932 |
| 11RP7 | 08719 |
| VRW11-4CB60 | 10112 |