NSN 5990-00-843-6761 · NIIN 008436761 · FSC 5990
NO DASHES 5990008436761
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.7530 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2410 |
| AAZX | SECOND SHOULDER LENGTH | INCHES MAXIMUM 0.1700 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 1.17 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| ABRY | LENGTH | SHOULDER INCHES MAXIMUM 0.2500 |
| AJSL | BODY SIZE | 23 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.6730 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3100 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.990 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| MATT | MATERIAL | BODY ALUMINUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.40 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.1090 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 4.0800 |
| AAQL | BODY STYLE | |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.80 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MINIMUM 8.0 AND MAXIMUM 24.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 60.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 600.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 600.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 325.50 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 1.24 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.2 TO 0.2 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 76.70 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.200 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9950 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.5990 AND INCHES MAXIMUM 0.6000 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 45.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-14346 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-R-14346 | 81349 |
| 23R9N6 | 81349 |
| 23R9N6 | 10112 |
| F7659638 | 19200 |
Supersedes
This item replaces cancelled NIINs 006909120 · 009953647. An older drawing citing one of those numbers resolves here.