NSN 5990-00-844-5659 · NIIN 008445659 · FSC 5990
NO DASHES 5990008445659
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 425.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 175.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2480 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2700.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 12.000 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.5 TO 7.5 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.7230 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0630 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8370 AND INCHES MAXIMUM 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 10 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 10.2 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 17.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 54.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 685.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 180.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 1000.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 466.00 |
| AJVW | ALIGNMENT HOLE QUANTITY | 2 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 560.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 50.00 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4750 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CTH-10-MS-4 | 4H618 |
| 1783131-001 | 56232 |
| AY503-44A3 | 55972 |
| AY503-44A3 | 96774 |
| 4077-08 | 99932 |
| CTH-10-MS-4 | 99932 |