NSN 5990-00-855-1056 · NIIN 008551056 · FSC 5990
NO DASHES 5990008551056
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 23.0 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.120 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 44.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CQTM | TERMINAL LOCATION | REAR |
| AJVM | SPLINE TOOTH QUANTITY | 13 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 0.04 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4810 |
| MATT | MATERIAL | BODY ALUMINUM OR STEEL CORROSION RESISTING |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6870 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1247 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 444.00 AND MAXIMUM 570.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 76.00 AND MAXIMUM 81.00 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0004 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0007 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 25.00 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.7210 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 0.7500 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 830.00 AND MAXIMUM 940.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 16.00 AND MAXIMUM 20.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.000 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MINIMUM 0.1900 |
| AJSL | BODY SIZE | 8 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 2.203 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |