NSN 5990-00-871-9528 · NIIN 008719528 · FSC 5990
NO DASHES 5990008719528
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 14.00 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 32.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 220.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 34.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 212.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 44.00 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.6710 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 166.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 11.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2810 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 119.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0370 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 783.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0900 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0930 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0625 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.8123 |
| AJSL | BODY SIZE | 10 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 32.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0625 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3900 |
| AAQL | BODY STYLE | |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 0.9370 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.8400 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10124-2 | 88818 |
| CDSH-10-AS-4/A321 | 99932 |
| CL41004002 | 05088 |
| 10124-2 | 10138 |
Supersedes
This item replaces cancelled NIIN 008372318. An older drawing citing one of those numbers resolves here.