NSN 5990-00-878-1910 · NIIN 008781910 · FSC 5990
NO DASHES 5990008781910
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 21.000 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 100.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 615.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.08 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 10.00 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 28.0 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.6450 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES MAXIMUM 0.125 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 820.00 |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | NOMINAL 0.2 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1450.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 290.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MAXIMUM 0.0320 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 190.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.408 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQTM | TERMINAL LOCATION | REAR |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MAXIMUM 0.3120 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.6910 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 0.7500 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWP | TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R1 POSITION A AND CONNECTION R2 POSITION B AND CONNECTION R3 POSITION C AND CONNECTION S1 POSITION H AND CONNECTION S2 POSITION E AND CONNECTION S3 POSITION J AND CONNECTION S4 POSITION F |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2900 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0015 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 088-400-4 | 92703 |
| 088-400-4 | 99743 |
| W1622C-1-26 | 07421 |