NSN 5990-00-879-3933 · NIIN 008793933 · FSC 5990
NO DASHES 5990008793933
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAQL | BODY STYLE | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 96214-530753 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 40.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MINIMUM 660.0 AND WATTS MAXIMUM 960.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 410.00 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.1820 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.800 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 16.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS MINIMUM 3150.0 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0003 AND INCHES MAXIMUM 0.0015 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 4.80 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 225.00 AND MAXIMUM 250.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 4.20 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2870.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 25.30 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES NOM. |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6620 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| AJSL | BODY SIZE | 14 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CGH-15-D-8 | 4H618 |
| 530753-1 | 96214 |
| CGH-15-D-8 | 99932 |
| 0530705301 | 09301 |