NSN 5990-00-880-8225 · NIIN 008808225 · FSC 5990
NO DASHES 5990008808225
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABWV | SHAFT DIAMETER | BOTH SHAFTS INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 470.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 81.00 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 40.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 9.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| CRHN | SHAFT SLOT WIDTH | BOTH SHAFTS INCHES NOMINAL 0.0200 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 190.00 |
| CRSJ | SHAFT TYPE | BOTH SHAFTS ROUND, SLOTTED |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.219 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1770.00 |
| CQZS | SHAFT SLOT DEPTH | BOTH SHAFTS INCHES NOMINAL 0.0470 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 330.00 |
| AJSL | BODY SIZE | 8 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.0210 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 100.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7450 AND INCHES MAXIMUM 0.7500 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 590.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 365.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 64.00 |
| ABXF | SHAFT LENGTH | BOTH SHAFTS INCHES MINIMUM 0.3600 AND INCHES MAXIMUM 0.3900 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 137030-03 | 35351 |
| CM41002022 | 88818 |
| CM41004022 | 88818 |
| CTH3DD4L158 | 99932 |
| HTC-8-DD-4/F974 | 99932 |
| CTH-8-DD-4/L158 | 99932 |
| 04052573017899 | D1131 |
| CM41004022 | 05088 |
| CM41002022 | 09301 |
Supersedes
This item replaces cancelled NIIN 014519930. An older drawing citing one of those numbers resolves here.