NSN 5990-00-883-2962 · NIIN 008832962 · FSC 5990
NO DASHES 5990008832962
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1480 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9350 AND INCHES MAXIMUM 0.9380 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AAQL | BODY STYLE | |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| CWJD | SHAFT UNDERCUT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0730 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0620 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 |
| CTBP | SHAFT TIP LENGTH | SINGLE SHAFT INCHES NOMINAL 0.0830 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 150.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.2410 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 23.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 9.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.7380 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 170.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 30.00 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 720.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 32.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 8.80 |
| ABKU | FLANGE THICKNESS | INCHES MAXIMUM 0.0630 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8350 AND INCHES MAXIMUM 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4970 |
| AEDC | SHAFT UNDERCUT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0730 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, TAPERED, THREADED, UNDERCUT |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BB1435 | 61349 |
| AB1161 | 61349 |
| CGH10TS4/B599 | 99932 |