NSN 5990-00-883-9721 · NIIN 008839721 · FSC 5990
NO DASHES 5990008839721
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 5.4 |
| AJSS | FREQUENCY IN HERTZ | MINIMUM 1000.0 AND MAXIMUM 100000.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 6.80 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 9.90 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 2.500 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.995 AND ROTOR TO STATOR MAXIMUM 1.000 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0470 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 26.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 30.70 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 45.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.00 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0905 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4070 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 10 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.7410 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0330 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 9.2810 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9270 AND INCHES MAXIMUM 0.9400 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 2.0 |
| AAQL | BODY STYLE | |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1383711 | 56232 |
| CUH-10-BQS-1/A907 | 99932 |