NSN 5990-00-904-0324 · NIIN 009040324 · FSC 5990
NO DASHES 5990009040324
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6160 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 33.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 780.0 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 7.70 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 500.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 7.30 |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.500 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 725.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 3410.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0630 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.8370 AND INCHES MAXIMUM 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0500 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.103 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 30.50 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 9.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.00 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 3000.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3750 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AY100SA49A1 | 55972 |
| AY100SA49A1 | 96774 |
| CGH-10-AS-9 | 99932 |