NSN 5990-00-904-3475 · NIIN 009043475 · FSC 5990
NO DASHES 5990009043475
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 161.00 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 58.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 125.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 45.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 16.000 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 71.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.3745 AND INCHES MAXIMUM 0.3750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6550 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 380.0 |
| CQTM | TERMINAL LOCATION | REAR |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.4970 AND INCHES MAXIMUM 0.5000 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0400 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.4370 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0400 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4150 |
| AJSL | BODY SIZE | 5 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 46.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 292.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 88.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 508.00 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| L409 008 002 | 36090 |
| CJ00565100 | 88818 |
| CJ005651-0 | 88818 |
Supersedes
This item replaces cancelled NIIN 001812384. An older drawing citing one of those numbers resolves here.