NSN 5990-00-904-7315 · NIIN 009047315 · FSC 5990
NO DASHES 5990009047315
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQTM | TERMINAL LOCATION | REAR |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3370 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.5000 AND INCHES MAXIMUM 0.5005 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.6650 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0580 AND INCHES MAXIMUM 0.0680 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | MINIMUM 107.10 AND MAXIMUM 130.90 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2325877 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJVF | PHASE SHIFT ANGLE IN DEG | OUTPUT TO INPUT MAXIMUM 10.200 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 60.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 9.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 1.028 AND ROTOR TO STATOR MAXIMUM 1.090 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 250.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 28.90 AND MAXIMUM 39.10 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 28.80 AND MAXIMUM 35.20 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 22.50 AND MAXIMUM 27.50 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.1880 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.1250 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.00 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0350 AND INCHES MAXIMUM 0.0450 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.1900 |
| AJSL | BODY SIZE | 10 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 100.0 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2325877REVC | 53711 |
| CDN10AS1 | 56232 |
| CDH10AS1/B443 | 99932 |
| 2325877 | 10001 |