NSN 5990-00-904-8856 · NIIN 009048856 · FSC 5990
NO DASHES 5990009048856
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4860 AND INCHES MAXIMUM 0.4950 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.5450 AND INCHES MAXIMUM 3.5600 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 1.0650 |
| AAQL | BODY STYLE | |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -0.1 TO 0.1 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES NOMINAL 0.20 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 0.10 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 3.0590 AND INCHES MAXIMUM 3.0650 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0230 AND INCHES MAXIMUM 0.0350 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.485 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0300 AND INCHES MAXIMUM 0.1800 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 12.0 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 12.00 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AJSL | BODY SIZE | 11 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11RB2 | 08719 |