NSN 5990-00-906-4840 · NIIN 009064840 · FSC 5990
NO DASHES 5990009064840
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 42.0 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2225 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 155.00 |
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 32.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 75.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 15.50 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.0000 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3350 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0620 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 14.50 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0740 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1850 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4930 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 80.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 150.0 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 250.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 30.00 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.0 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.500 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 30.00 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| CQTM | TERMINAL LOCATION | REAR |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.7800 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JSH11RS2A710 | 99932 |
| 229-7012-000 | 13499 |