NSN 5990-00-908-4252 · NIIN 009084252 · FSC 5990
NO DASHES 5990009084252
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | NOMINAL 520.00 |
| AJSL | BODY SIZE | 15 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5400 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 20.0 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MINIMUM 0.1950 AND INCHES MAXIMUM 0.2100 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 2500.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.980 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.1000 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 20.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 156.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.6560 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 8.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 320.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 390.00 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.9160 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 480.00 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1867 AND INCHES MAXIMUM 0.1872 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.3120 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.500 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 330199 | 80249 |
| VRB15-20-4A30 | 10651 |