NSN 5990-00-910-2415 · NIIN 009102415 · FSC 5990
NO DASHES 5990009102415
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2500.00 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 450.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 550.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 100.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.200 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 16.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.00 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0005 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0003 AND INCHES MAXIMUM 0.0008 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQTM | TERMINAL LOCATION | REAR |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 280.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 22.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 58.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 800.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 120.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 940.00 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6160 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| AJSL | BODY SIZE | 8 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CTH-8-A-6 | 99932 |