NSN 5990-00-912-7682 · NIIN 009127682 · FSC 5990
NO DASHES 5990009127682
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 2.200 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 446.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 79.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 548.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.800 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6580 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1887.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 350.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 182.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AAQL | BODY STYLE | |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 6.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4180 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 10.2 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 40.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 90.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7450 AND INCHES MAXIMUM 0.7500 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 900-083-0007 | 1K426 |
| 08CT-0163-D | 51761 |
| HTC-8-E-4 | 4H618 |
| 900-083-0007 | 58880 |
| 4277-03-06 | 58880 |
| 4277-03-06 | 99932 |
| HTC-8-E-4 | 99932 |
| 900-083-0007 | 99932 |
Supersedes
This item replaces cancelled NIINs 009646399 · 010798644. An older drawing citing one of those numbers resolves here.