NSN 5990-00-912-9166 · NIIN 009129166 · FSC 5990
NO DASHES 5990009129166
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 30.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2950 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 4700.00 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 45.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 75.00 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0930 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 500.00 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 3720.00 |
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 410.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.500 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.0000 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.700 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.2670 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.1850 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0620 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 510.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.7320 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| AAQL | BODY STYLE |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 400491 | 20284 |
| 11CX4E | 81349 |
| CR90913013 | 88818 |
| CR90913013-0 | 88818 |
| 11CX200B1-3 | 06989 |
| 400491 | 12909 |