NSN 5990-00-916-1419 · NIIN 009161419 · FSC 5990
NO DASHES 5990009161419
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 173.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6400 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1250 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 15.70 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 125.0 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0005 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQTM | TERMINAL LOCATION | REAR |
| CWMS | MOUNTING THREAD TOLERANCE CLASS | INTERNAL 2B |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 8 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 40.00 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0620 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8090 AND INCHES MAXIMUM 0.8150 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 7.60 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 38.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 23.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 4.30 |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | NOMINAL 3.0 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 45.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 6.0 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0470 AND INCHES MAXIMUM 0.0530 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3600 AND INCHES MAXIMUM 0.3900 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.0150 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 0.85 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 176.0 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 41.00 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11RC-101-B-1 | 06989 |
| 100905 | 09062 |