NSN 5990-00-916-3872 · NIIN 009163872 · FSC 5990
NO DASHES 5990009163872
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 128.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 110.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 165.00 |
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 145.00 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 90.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 75.00 |
| AJTX | COMPENSATION METHOD | RESISTOR COMPENSATED |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | NOMINAL 2400.00 |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | ROTOR TO COMPENSATOR NOMINAL 0.990 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.01 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 555.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 500.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 65.00 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 26.0 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.9750 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.975 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5930 AND INCHES MAXIMUM 0.6250 |
| AJSL | BODY SIZE | 11 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1246 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.9700 |
| CQTM | TERMINAL LOCATION | REAR |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.5630 AND INCHES MAXIMUM 2.5950 |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 59.00 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 436203 | 1PQF4 |
| 436203 | 36378 |
| CR90980024 | 88818 |
| 11RP3A | 08719 |