NSN 5990-00-919-0587 · NIIN 009190587 · FSC 5990
NO DASHES 5990009190587
In Stock
RESOLVER,ELECTRICAL,LINEAR
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 800.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0310 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.717 AND ROTOR TO STATOR MAXIMUM 0.950 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 9.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 152.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 447.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.2500 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| CQTM | TERMINAL LOCATION | REAR |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1250 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.6250 |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 62.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 584.0 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 0.7500 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 105.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 18.000 |
| AJVQ | LINEARITY IN PERCENT | 0.50 |
| AJVP | MAXIMUM LINEAR RANGE IN DEG | -50.0 TO 50.0 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.9240 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| U210908 | 82686 |
| CM41016012 | 88818 |
| 523774-1 | 96214 |