NSN 5990-00-927-9751 · NIIN 009279751 · FSC 5990
NO DASHES 5990009279751
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 2060.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 137.00 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 45.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 159.00 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 80.00 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3390 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.009 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0006 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 60.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.1 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES MINIMUM 0.5450 AND INCHES MAXIMUM 0.5560 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | FRONT SHAFT INCHES NOMINAL 0.2000 |
| CRSJ | SHAFT TYPE | FRONT SHAFT ROUND, THREADED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.767 AND ROTOR TO STATOR MAXIMUM 0.799 |
| CWBH | SHAFT NOMINAL THREAD SIZE | FRONT SHAFT INCHES 0.190 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | FRONT SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | FRONT SHAFT RIGHT-HAND |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0580 AND INCHES MAXIMUM 0.0810 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.300 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7820 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0005 AND INCHES MAXIMUM 0.0015 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| VTR11/18-4C | 10112 |