NSN 5990-00-937-2199 · NIIN 009372199 · FSC 5990
NO DASHES 5990009372199
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.453 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.1000 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5710 |
| AJSL | BODY SIZE | 15 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.3120 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1871 AND INCHES MAXIMUM 0.1873 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES NOMINAL 4.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 175.00 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.6350 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 20.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 37.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 8.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 11.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 25.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 5.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.9550 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 1.00 |
| CQTM | TERMINAL LOCATION | REAR |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 4.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7618484P1 | 99971 |
| 7618484-1 | 99971 |
| R150HH103BA | 09017 |