NSN 5990-00-942-4006 · NIIN 009424006 · FSC 5990
NO DASHES 5990009424006
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.6150 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | MINIMUM 380.0 AND MAXIMUM 420.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 145.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 760.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 36.00 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.9800 |
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 9.30 |
| AJSL | BODY SIZE | 11 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.8570 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 175.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 78.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 4.70 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.454 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 8 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4680 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 7.00 |
| AAQL | BODY STYLE | |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.000 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11R2N4R100X | 88818 |
| CR90918001 | 88818 |
| 4439107 | N0086 |
| B81E0004 | 12464 |