NSN 5990-00-942-6537 · NIIN 009426537 · FSC 5990
NO DASHES 5990009426537
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 2.203 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 250.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 1550.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 81.000 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 326.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.500 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 26.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -4.0 TO 4.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 6.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.00 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0380 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | SIDE |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3500 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 6900.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 1230.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 750.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 17.0 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1872 |
| AAQL | BODY STYLE | |
| AJSP | STATOR INPUT CURRENT RATING | AMPERES MAXIMUM 9.0 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.5700 AND INCHES MAXIMUM 2.6300 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 1300.00 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5400 |
| AJSL | BODY SIZE | 8 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7470 AND INCHES MAXIMUM 0.7530 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 539D783P1 | 89954 |
| 539D783-1 | 89954 |
| CM41003023 | 88818 |
| T08QV09L467 | 99932 |
| T08-XB-09/L652 | 99932 |
Supersedes
This item replaces cancelled NIIN 007302137. An older drawing citing one of those numbers resolves here.