NSN 5990-00-942-6539 · NIIN 009426539 · FSC 5990
NO DASHES 5990009426539
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.8750 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.4370 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.3120 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 90.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1872 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2000 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1480.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 744.00 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0013 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7720 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5550 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0004 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MINIMUM 60.0 AND MILLIAMPERES MAXIMUM 85.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MINIMUM 780.0 AND MILLIWATTS MAXIMUM 1200.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 170.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 106.00 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 5.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 5.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.05 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 40.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.3120 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| AJSL | BODY SIZE | 15 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB W/SCREW 5 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S210-401-1540 | 07421 |
| VCX15-18-4C | 10651 |