NSN 5990-00-945-9811 · NIIN 009459811 · FSC 5990
NO DASHES 5990009459811
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
47 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| AAQL | BODY STYLE | |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 12.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 34.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5620 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSL | BODY SIZE | 11 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1900 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 107.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 5500.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.0000 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 280.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 3.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 14.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 3.30 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 8.50 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.454 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 52.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 3.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1420 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1830 AND INCHES MAXIMUM 0.1850 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 17.80 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7720 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 4124-15-02 | 58880 |
| KJR-11-ERS-41A | 99932 |
| 229-3031-000 | 13499 |