NSN 5990-00-951-2482 · NIIN 009512482 · FSC 5990
NO DASHES 5990009512482
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0938 |
| AAQL | BODY STYLE | |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9270 AND INCHES MAXIMUM 0.9400 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.3510 AND INCHES MAXIMUM 0.3570 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | MINIMUM 702.10 AND MAXIMUM 949.90 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | MINIMUM 204.00 AND MAXIMUM 276.00 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 54.40 AND MAXIMUM 81.60 |
| AJTA | ZRS RESISTANCE IN OHMS | MINIMUM 296.00 AND MAXIMUM 444.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 200.00 AND MAXIMUM 271.40 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 37.40 AND MAXIMUM 50.60 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.9760 AND INCHES MAXIMUM 2.0390 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 5.0 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | MINIMUM 112.00 AND MAXIMUM 168.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.060 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 36.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 340.0 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 264.00 AND MAXIMUM 396.00 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0920 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.2260 AND INCHES MAXIMUM 0.3750 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHYF | SECURING HOLE QUANTITY | 2 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.0 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 12.500 AND INPUT TO OUTPUT MAXIMUM 16.500 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.4690 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10RX-0315-AZ | 51761 |
| ZP7-A | 51761 |
| 4061-13-01 | 99932 |
| 1754601-1 | 07187 |