NSN 5990-00-954-5059 · NIIN 009545059 · FSC 5990
NO DASHES 5990009545059
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.8400 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 10.2 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 90.0 |
| ABXF | SHAFT LENGTH | REAR SHAFT INCHES NOMINAL 0.2190 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 10.2 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 90.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 600.0 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 56.00 AND MAXIMUM 84.00 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 44.80 AND MAXIMUM 67.20 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 72.90 AND MAXIMUM 89.10 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 39.60 AND MAXIMUM 48.40 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 18.000 AND INPUT TO OUTPUT MAXIMUM 28.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 30.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 10.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.2810 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | MINIMUM 111.35 AND MAXIMUM 150.65 |
| CQZS | SHAFT SLOT DEPTH | BOTH SHAFTS INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | MINIMUM 150.45 AND MAXIMUM 203.55 |
| CRHN | SHAFT SLOT WIDTH | BOTH SHAFTS INCHES NOMINAL 0.0200 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AJSL | BODY SIZE | 10 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.965 AND ROTOR TO STATOR MAXIMUM 1.015 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0570 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABWV | SHAFT DIAMETER | BOTH SHAFTS INCHES NOMINAL 0.0898 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES NOMINAL 0.4130 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.9130 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9350 AND INCHES MAXIMUM 0.9380 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 7 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 600.0 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 464966-2 | 96214 |
| CDSH10JMS5A228 | 99932 |