NSN 5990-00-965-7085 · NIIN 009657085 · FSC 5990
NO DASHES 5990009657085
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0450 AND INCHES MAXIMUM 0.0550 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9700 AND INCHES MAXIMUM 0.9800 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 79.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 35.00 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.2410 AND INCHES MAXIMUM 2.2440 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQTM | TERMINAL LOCATION | REAR |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5590 AND INCHES MAXIMUM 0.5650 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 73.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 16.60 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0310 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 57.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0125 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.6820 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 420.00 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8090 AND INCHES MAXIMUM 0.8190 |
| MATT | MATERIAL | BODY ALUMINUM ALLOY |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0310 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 76.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 12.10 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 4.500 AND INPUT TO OUTPUT MAXIMUM 6.200 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJSL | BODY SIZE | 10 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AY110BA43A1 | 55972 |
| 3162019 | 59364 |
| 1047291 | 59364 |
| 3162019 | 77068 |
| 1047291 | 77068 |
| AY110BA43A1 | 96774 |